REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Sunny
		Instructions
		Maintenance
		Engines
		Cooling
		Heating and ventilation system
		Fuel and exhaust system
			Carbureted engines
			Engines with fuel injection system
			The power supply / exhaust
				Models with one-point electronic fuel injection
					Specifications
					Air filter
					An accelerator rope
					The accelerator pedal
					Gasoline not containing tetraethyl lead
					Fuel Injection System
					Fuel system
					Fuel pump
					Fuel Level Sensor
					Fuel tank
					Throttle Body
					Fuel injection system / Ignition
					The elements of the fuel injection system
					Intake manifold
				Models with multi-point electronic fuel injection
			Emission of exhaust gases
		The system of the engine is started
		Coupling
		Transmissions
		Axles
		Brakes
		Suspension and steering
		Body
		Electrical

An accelerator rope

Withdrawal

PERFORMANCE ORDER

1. Detach the cable from the cam on the throttle body.
	2. Remove the nut cover of a cable to the bracket and remove the cover of a cable from an arm (arrow shows the adjusting nut throttle cable).
3. Release the rope across the road paving.
4. In salon remove the bottom panel of the driver's side.
5. Disconnect the cable from the pedal.
6. Remove the nuts in the shell bulkhead and remove the cable by pulling the engine compartment.

Setting

PERFORMANCE ORDER

1. Pass the cable through the bulkhead.

2. Pull the cable into the engine compartment and lay in place.

3. Secure the nuts on the cover of a cable bulkhead.

4. Connect the cable to the pedal.

5. Install the bottom panel.

6. Secure the cover of a cable across the road.

7. Attach a cable to the cam on the axis of the throttle.

8. Adjust the cable.

Adjustment

PERFORMANCE ORDER

1. Loosen the adjusting nuts, make sure that the cam abuts the stopper.

2. Tighten the nut far as only the cam begins to move, release the nut 1.5-2 turns and tighten the locknut.

3. Have an assistant press on the pedal and check the smooth movement of the cam.

« previos page
Air filter