REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Sunny
		Instructions
		Maintenance
		Engines
			The petrol engine of 1.4 and 1.6 liters
				Kinds of repair without dismantling the engine from the vehicle
					Technical data
					Compression
					The order of installation of the piston of 1st cylinder at top dead center of the compression stroke
					Cylinder head cover
					The crankshaft pulley
					The cover of a chain drive of cam
					Chain drive camshafts
					Tensioners and idlers chain drive sprocket
					Gaps in the valve operating mechanism
					Camshafts and tappets
					Cylinder Head
					Sump
					Oil pump
					Seals, crankshaft
					Flywheel
					Engine mount details
				Dismantle and engine major repairs
			The petrol engine of 2.0 liters
			Diesel engine
		Cooling
		Heating and ventilation system
		Fuel and exhaust system
		The system of the engine is started
		Coupling
		Transmissions
		Axles
		Brakes
		Suspension and steering
		Body
		Electrical

The crankshaft pulley

Removing

PERFORMANCE ORDER

1. Remove the auxiliary drive belt.
2. If necessary, set the piston of cylinder 1 at TDC compression stroke.
3. To exclude a turn when loosening the crankshaft pulley bolt to turn a higher gear and ask the assistant to the failure to press the brake pedal. If the bolt turns on the removed engine, lock the flywheel device (see Fig. Subsection 3.1.1.15).
	4. Remove the bolt and the pulley from the crankshaft. If the key of the pulley has a loose fit, remove the key and keep it together with the pulley.

Setting

PERFORMANCE ORDER

1. Install the key (if removed).
2. Align the pulley groove with the key, put the pulley on the crankshaft and tighten the bolt with a washer.
	3. Lock the crankshaft from turning and tighten the bolt to the specified torque.
4. Put belts and adjust the tension.