REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Sunny
		Instructions
		Maintenance
		Engines
			The petrol engine of 1.4 and 1.6 liters
				Kinds of repair without dismantling the engine from the vehicle
					Technical data
					Compression
					The order of installation of the piston of 1st cylinder at top dead center of the compression stroke
					Cylinder head cover
					The crankshaft pulley
					The cover of a chain drive of cam
					Chain drive camshafts
					Tensioners and idlers chain drive sprocket
					Gaps in the valve operating mechanism
					Camshafts and tappets
					Cylinder Head
					Sump
					Oil pump
					Seals, crankshaft
					Flywheel
					Engine mount details
				Dismantle and engine major repairs
			The petrol engine of 2.0 liters
			Diesel engine
		Cooling
		Heating and ventilation system
		Fuel and exhaust system
		The system of the engine is started
		Coupling
		Transmissions
		Axles
		Brakes
		Suspension and steering
		Body
		Electrical

Flywheel

Withdrawal

PERFORMANCE ORDER

1. Remove the check point (see. Subsection 9.1) and traction (see. Subsection 8.5).
	2. Fix a flywheel from turning.
3. Remove the screws and carefully remove the flywheel.
4. If necessary, remove the reinforcing plate and pins.

Check

PERFORMANCE ORDER

1. If damage is found on the surface of the flywheel fit clutch must be replaced.

2. In the event of wear or loss of teeth of the crown to be changed. Replace the flywheel to run in the service of Car Nissan.

Setting

PERFORMANCE ORDER

1. Install guide pins and the reinforcing plate.

2. Clean the mating surfaces of the crankshaft and flywheel.

3. Put the crankshaft on the flywheel and tighten the bolts.

4. Fix a flywheel from turning and tighten the bolts to the specified torque.

5. Install the clutch and gearshift.