REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Sunny
		Instructions
		Maintenance
		Engines
		Cooling
		Heating and ventilation system
		Fuel and exhaust system
			Carbureted engines
			Engines with fuel injection system
			The power supply / exhaust
				Models with one-point electronic fuel injection
				Models with multi-point electronic fuel injection
					Specifications
					Air filter
					An accelerator rope
					The accelerator pedal
					Fuel Injection System
					Fuel system
					Fuel pump
					Fuel Level Sensor
					Fuel tank
					Throttle Body
					Elements of the fuel injection system (engines of 1.6 liters)
						The fuel manifold and fuel injectors
						Fuel pressure control
						Throttle potentiometer
						Additional air valve
						Air Flow Sensor
						The solenoid valve of the engine fast
						Temperature Valve rapid engine warming
						Sensor crank angle and the power transistor
						Coolant temperature
						Electronic engine control unit
						The switch of neutral transfer
						The switch of blocking of a starter / reversing light
						Relay electronic engine control unit and the fuel pump
						The switch in the steering gain
						Switch the air conditioning system
						Speed sensor
					Elements of the fuel injection system (engines of 2.0 liters)
					Intake manifold
			Emission of exhaust gases
		The system of the engine is started
		Coupling
		Transmissions
		Axles
		Brakes
		Suspension and steering
		Body
		Electrical

printable version

The solenoid valve of the engine fast

Solenoid valve to increase the speed of the engine is idling

Solenoid valve - indicated by the arrow.

The solenoid valve of the engine fast idling mounted on the front side of the throttle body.

Before his removal, disconnect the negative battery terminal.

If necessary, remove the air filter, the instructions given in Section 6.3.2.2, to improve access to the valve.

Refitting

PERFORMANCE ORDER
1. Disconnect the connection from the solenoid valve.
2. Remove the solenoid valve from the throttle body, remove the plunger and spring-loaded sealing washer.
3. Installation is spent upside-down removals. At installation use a new sealing washer. Make sure the plunger and spring and have been correctly installed.

« previos page
Air Flow Sensor

next page »
Temperature Valve rapid engine warming