| 1. To disconnect a wire from "the minus" plug of the storage battery. |
| 2. Disconnect the high voltage wires from the distributor cap. |
| 3. Remove the screen 21 (see. Fig. The ignition distributor), unfasten the spring 11 and remove the cover 1. |
| 4. Remove slider 3 and 4 anti-dust screen. |
| 5. Loosen the screws 5 and 6 to remove the cover. |
| 6. Disconnect breaker contacts. |
| 7. Remove the screws that secure the fixed contact 8 and remove the pins 7 and 8. |
| 8. To establish new contacts. |
| 9. Install the removed parts. |
| 10. Adjust the angle of the closed state of the contacts and the ignition timing. |
