REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf IV (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Golf 4
		Instructions
		Engine
		Cooling system
		Fuel System
		Exhaust system
		Ventilation and heating system
		Coupling
			Clutch disc
			Coupling disk on cars with engines 1,4 and 1,6-I
				Withdrawal
				Check
				Setting
			Bleeding of the hydraulic clutch
			The basic malfunctions of coupling
		Transmission
		Suspension brackets and power shafts
		Steering
		Wheels and tires
		Brakes
		Body
		Electrical equipment and wiring

printable version

Check

PERFORMANCE ORDER

1. Check the riveted joints in the pressure plate. The pressure plate is damaged or missing rivets must be replaced.

2. Check the pressure plate for cracks, metal penetration and wear surfaces. Using a steel ruler and the blade of the probe, check the flatness of the working surface of a press disk. Nonflatness press disk should not exceed 0.2 mm.

3. Check the condition of the friction surface of the flywheel for cracks, metal penetration and surface wear.

4. Check the condition of the friction linings and the clutch disc in the presence of traces of oil on them and mechanical damage, replace the clutch disc.

5. Faulty release bearing can be determined without removing it from the car, which requires the engine is running, press the clutch pedal. If the clutch pedal is pressed, an additional noise, means the release bearing is defective and should be replaced.

« previos page
Withdrawal

next page »
Setting