| 1. Remove the fuse for the fuel pump ?��28 of the fuse box. |
| 2. Connect the LED probe between ground and one of the contacts of the fuse. |
| 3. Remove the top finish in deepening for feet of the driver. |
| 4. Turn on the starter. At the same time must engage with a click of the fuel pump relay. In addition, the LED should light probe. |
| 5. If the switch does not turn on, check the electrical circuit of the relay. |
| 6. If the probe LED is not lit, but the relay LED connect the probe to the other terminal of the fuse. |
| 7. If the probe LED still is not lit, connect an additional wire contact 23 of fuel pump relay and contact fuse. |
| 8. If the fuel pump is started, it means that the relay is faulty and must be replaced. |