add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf IV (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Golf 4
Home
 
Volkswagen
Golf 4
Instructions
Engine
Cooling system
Fuel System
Cars with petrol engines
Removal and installation of the fuel pump / fuel level sensor
Removal and installation of the fuel filter (petrol engines)
Adjusting accelerator cable
Removing and installing air cleaner housing
Remote check of elements of fuel system
Checking the fuel pump
Checking the fuel pump relay
The engine management system
Cars with diesel engines
Exhaust system
Ventilation and heating system
Coupling
Transmission
Suspension brackets and power shafts
Steering
Wheels and tires
Brakes
Body
Electrical equipment and wiring
 


Hit Counter by Digits


print page printable version

Remote check of elements of fuel system



Remote check of the fuel pump


1 - pressure sensor;
2 - screw terminal;
3 - additional wire fuse 8 A;
4 - Flat contact electrical connector;
5 - two-wire cable

Remote check is required if the fuel pump power to work without starting the engine.

For remote testing requires the following elements:

- pressure sensor;
- Clamping contact (crocodile);
- Wire fuse of 8 A;
- Flat electrical contact;
- Two-wire section of 1.5 mm 2 and a length of about 5 m.

PERFORMANCE ORDER
1. Remove the fuse ?��28 for the fuel pump fuse.
2. Connect the flat contact remote testing to the contacts of the fuse in the fuse box.
3. When you enable the pressure sensor remote fuel pump should start working.




« previos page
Removing and installing air cleaner housing
next page »
Checking the fuel pump

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.