REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf IV (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Golf 4
		Instructions
		Engine
		Cooling system
		Fuel System
			Cars with petrol engines
				Removal and installation of the fuel pump / fuel level sensor
				Removal and installation of the fuel filter (petrol engines)
				Adjusting accelerator cable
				Removing and installing air cleaner housing
				Remote check of elements of fuel system
				Checking the fuel pump
				Checking the fuel pump relay
				The engine management system
			Cars with diesel engines
		Exhaust system
		Ventilation and heating system
		Coupling
		Transmission
		Suspension brackets and power shafts
		Steering
		Wheels and tires
		Brakes
		Body
		Electrical equipment and wiring

Removal and installation of the fuel filter (petrol engines)

The fuel filter on models with petrol engines

1 - the fuel filter;
2 - the fuel hose;
3 - the fuel hose;
4 - the holder;

5 - a bolt;
6 - the arrow on the fuel filter housing, indicating the direction of the flow of fuel;
7 - to the fuel line of the engine

Withdrawal

PERFORMANCE ORDER

1. The fuel filter is fixed to the bottom of the car in front of the fuel tank.

2. Raise the rear of the car and fix on supports. Install a fuel filter the corresponding container.

3. Loosen the hose clamps securing the fuel hoses to the fuel filter.

4. Close the hose connection with a cloth and remove the fuel hose from the fuel filter.

5. Loosen the bolt of the fuel filter.

6. Remove the fuel filter from the holder.

Setting

PERFORMANCE ORDER

1. Install the new fuel filter so that the arrow on the filter coincides with the direction of flow of fuel through the fuel filter.

2. Screw the holder of the fuel filter.

3. Connect to the fuel filter fuel hoses and fix their collars.

4. Start the engine and check the tightness of the fuel system.

A warning

On models with engine 2,3-I with an automatic transmission wire accelerator controls the throttle valve and switch on the bulkhead.