REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Elantra
		Gasoline engines 1.6, 1.8 and 2.0 liters
		The diesel engine of 2.0 liters
		Greasing system
		Cooling
		Fuel system
		Control systems and emission control
		Ignition system
		The system of preliminary heating of the diesel engine
		Coupling
		Manual transmission
		Automatic Transmission
		Drive shafts, front and rear axles
		Suspension
		Steering
			Technical data
			Check of a free wheeling of a steering wheel
			Checking steering angle of front wheels
			Check torque pin of the spherical rod end
			Check of effort steering
			Checking the steering wheel return to its original position
			Checking the belt drive power steering pump
			Check the fluid level
			Liquid replacement in a hydraulic drive power steering
			Bleeding the hydraulic system of the power steering
			Checking the fluid pressure in the hydraulic system
			The steering column / steering shaft
			Removing and installing steering column lock
			Steering transfer
			The power steering hoses
			Filling fluid Power Steering
			Power steering pump
			Troubleshooting steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

Checking the fluid pressure in the hydraulic system

PERFORMANCE ORDER

Disconnect the pressure hose from the power steering pump. Between pressure hose disconnected and the pump connect the special measuring tool, as shown in the figure.
Bleed the hydraulic power-assisted steering, and then start up the engine and turn the steering wheel several times so that the liquid temperature rose to 50 ?� C.
Increase the engine speed to 1000 ^min -1.
Close the valve of the special tool and measure the pressure. The fluid pressure generated by the power steering pump: 1209-1280 psi.

Do not hold the valve closed special tools for more than 10 seconds.

Remove the special tools, and connect the discharge hose to the pump, tighten the hose nut torque. Torque: 55-65 N ??? m.
Remove air from a hydraulic drive power steering.