add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)
general info. full specifications. diagnostics. hints. tips. tricks
 Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Technical data
Check of a free wheeling of a steering wheel
Checking steering angle of front wheels
Check torque pin of the spherical rod end
Check of effort steering
Checking the steering wheel return to its original position
Checking the belt drive power steering pump
Check the fluid level
Liquid replacement in a hydraulic drive power steering
Bleeding the hydraulic system of the power steering
Checking the fluid pressure in the hydraulic system
The steering column / steering shaft
Removing and installing steering column lock
Steering transfer
The power steering hoses
Filling fluid Power Steering
Power steering pump
Troubleshooting steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

The steering column / steering shaft



Withdrawal

PERFORMANCE ORDER

  1. Disconnect the negative battery terminal.
  2. Remove the driver airbag.

For vehicles not equipped with a driver airbag remove the button on the audio signal.

  1. Loosen the nut of the steering wheel.
  1. Put combination labels on the end of the steering shaft and steering wheel puller and remove the steering wheel.
  1. Remove the screws and remove the column cover.
  1. Disconnect the multifunction switch electrical connectors.
  1. Remove the three screws and remove the multi-selector.
  1. Remove the four screws and remove the bottom protection against collision.
  1. Remove the five bolts connecting the steering shaft and a universal joint.
  1. Remove the bolts and remove the steering column and the shaft with a universal joint.




« previos page
Checking the fluid pressure in the hydraulic system		 next page »
Removing and installing steering column lock

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.