printable version
Check circuit breaker starter interlock (automatic transmission selector switch)
| Fig. 3.48. Check circuit breaker starter interlock
|
Adjusting the lock starter switch (selector switch automatic transmission) and cable transmission control
| Fig. 3.49. Adjusting the switch of blocking of a starter
|
Set the selector lever in position ?�N?�. Loosen the adjusting nut cable transmission control lever to manual control. Set the manual control lever (manual control lever) to neutral (?�N?�).
Loosen the bolts lock starter switch (selector switch lever) and rotate the housing so that the hole in the flange body switch align with the holes at the end of the arm of manual control (manual control lever, section A-A in Figure 3.50 No change in the position switch of blocking of a starter (switch selector lever), tighten the bolts securing it to the specified torque.
Gently pull the cable that connects the selector lever with the control valve in the direction indicated by the arrow in Figure 3.51, and then tighten the adjusting nut. Make sure that the selector lever is in position ?�N?�. Check the included programs each position selector lever and make sure the transmission works fine on each of the ranges.
|