printable version
Check the pressure in the hydraulic control lever
Warm up the engine and the automatic transmission so that the oil temperature in the automatic transmission (ATF) has reached normal operating temperature (80-100 ?� C). Lift up the vehicle so as to hang the drive wheels.
Connect the special tool (adapter and a pressure gauge) to the appropriate holes for the pressure test (Fig. 3.59). Measure the oil pressure in the automatic transmission (ATF) in each line under the conditions shown in Table 3.10, and check that the measured values of the nominal value. If the measured pressure is outside the nominal value, repair in accordance with Table 3.11.
|