REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Magentis / Optima (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Magentis
		Engines
		Lubrication System
		Cooling system
		The control and toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
		Power shafts, axles
		Suspension
		Steering
		Brakes
			Technical data
			Anti-lock brakes
			Checking and adjusting the brake pedal position
			Check the brake servo
			Bleeding the hydraulic system of a drive of brakes
			Bleeding the hydraulic system of a drive of brakes with scanner use
			Adjust the parking brake stroke
			Brake pedal
			The main brake cylinder
			Vacuum brake booster
			Brake tubes and hoses
			Pressure regulator
			Replacing the front brake pads
			Caliper front brake
			Rear drum brakes
			Replacing the working brake cylinder
			Rear disc brakes
			Saddle
			Hydraulic block HECU (the hydraulic and electronic control unit)
			Wheel speed sensor
			Parking brake
			Troubleshooting
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

printable version

Brake tubes and hoses

PERFORMANCE ORDER

1. Check the brake hoses for cracks and local swelling. If necessary, replace the brake hose.
2. Check the brake lines for cracks, damage and corrosion.
3. Check the union nuts of brake hoses for damage and leaks.

Setting

PERFORMANCE ORDER

1. Install the brake pipe, without twisting them.
2. Brake hoses should be installed as far as possible from the weld edges or moving parts of the car.
3. Tighten all connections required torques.

Tightening torque coupling nuts: 13-17 N ??? m
Tightening torque brake hoses to the front caliper: 25-30 N ??? m

« previos page
Vacuum brake booster

next page »
Pressure regulator