REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
			Check of work and adjustment of position of the selector lever
			Check of level and liquid replacement in an automatic transmission
			The procedure for replacing the liquid in the converter of an automatic transmission
			Leaks of a liquid from an automatic transmission
			Replacement of oil sealing rings
			The unit control valves
			Radiator cooling automatic transmission fluid
			Removing and installing automatic transmission
			Repair of an automatic transmission
			Oil pump
			The body of the control valve
			The switch O / D
			Switch range gearbox
			The temperature sensor of an automatic transmission
			Speed sensor at the input / turbine
			Speed sensor
			Solenoid valves
			The linear solenoid valve
			Lever
			Repair of the selector lever
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

Solenoid valves

Withdrawal

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.
2. Disconnect the connector from the solenoid valve.
3. Measure the resistance between each contact and "weight". Resistance: 14-18 Ohm
A warning 2: Valve torque converter; 3: The solenoid valve A; 6: The solenoid valve B; 9: solenoid valve C.
	4. Otherwise, check the electrical circuit for an open or short circuit. Replace the solenoid valve.

Check conduction

PERFORMANCE ORDER

1. Disconnect the 55-pin connector from the control unit automatic transmission.

2. Check for continuity between terminals C221-30, C221-33, C221-32 and C221-4, and "weight".

3. If conductivity is absent, check the electrical circuit.

« previos page
Speed sensor