1. Disconnect the negative battery terminal. |
2. Lift up the diagnostic connector on the sensor meter of air flow (MAF). |
3. Disconnect the air temperature sensor and the air flow meter. |
4. Remove the air filter. |
5. Disconnect the speed sensor on the input / turbine. |
6. Measure the resistance between terminals 1 and 2. Resistance: 200-400 Ohm |
7. Otherwise, replace speed sensor inlet / turbine. Torque: 8-11 N ??? m |
8. Replace the air filter |
9. Connect the air temperature sensor connector and the air flow meter. |
10. Establish a diagnostic socket. |
11. Connect the cable to the negative terminal of the battery. |