 printable version
Removal and installation of the expansion tank
Coolant expansion tank siphon type installed on the left in front of the engine compartment between the wing and the battery. For removing it from draining the cooling system is not required. You will need: face head, extension, knob-nose pliers. | 2. Stop the surge tank hose to prevent it from leaking coolant from the radiator. |
NOTE So arranged bolts expansion tank to the body panels. |
| | 4. Remove the surge tank bolts on the body ... | 5. ... and remove the tank, the filler neck threw him out of the hole in the body panel and the drain of a coolant. |
| | 6. Loosen the hose clamp on the expansion tank, squeezing it with pliers bent tabs, slide the clamp on a hose ... | 7. ... and remove the hose from the tank nozzle. |
NOTE When you install an expansion tank be sure to install protective tape on his hose. |
8. Install the expansion tank in the reverse order of removal. After accession to the hose fill the tank with coolant up to the mark ?�F?� (full) on the dipstick (see. "Checking and topping up the coolant"). |
|
