 printable version
Switches dashboard
Disconnect the negative battery terminal.
Power switches Remove the instrument cluster.
| Fig. 13.46. Fasteners right switch block 1 - the wiring harness connector; 2, 3 - brackets; 4, 5 - screw the bracket; 6, 7, 14 - the bolts casing; 8 - housing; 9 - the screw fixing the wiper switch; 10 - windshield wiper switch; 11 - the switch of the windshield washer and wipers turn on a single switch; 12 - screw cap; 13 - switch casing
|
Remove the screws, disconnect the connector and remove the required control unit from the housing of the instrument cluster (Fig. 13.46, 13.47). For disconnecting the screwdriver press the connector lock (Fig. 13.48).
| Fig. 13.48. Using a screwdriver, for forcing the lock connector
|
| Fig. 13.47. Elements of fastening of the left switch block 1 - the wiring harness connector; 2 - an arm; 3 - screw fixing the housing; 4 - a casing switches; 5 - screw and plug; 6 - screw fixing the headlamp switch; 7 - the switch of headlights; 8 - the screw of fastening of a casing; 9 - housing; 10 - the switch of the hazard warning lights and rear window defogger; 11 - the screw fastening the switch; 12 - the screw of the bracket; 13 - the screw; 14 - an arm
|
Installation is performed in reverse order of removal.
Separate switches Gently press the switch out of its slot, disconnect the connector and remove the switch. Installation is performed in reverse order of removal.
| 
