REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz E-Class W123 (from 1976 to 1985, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	W123
		Introduction
		Gasoline engines
		Coupling
		Manual transmission
		Automatic Transmission
		Driveline and rear axle
		The front suspension
		Rear suspension
		A steering
		Brakes
		Electrical
			Design and specifications
			Removing and installing the battery
			Topping up the electrolyte in the battery
			Charging the battery
			Technical obsluzhiva?�nie generator and special precautions
			Removing and installing the generator
			Check the vehicle alternator and voltage regulator
			Removal, survey and installation of generator brushes
			Removing and installing starter
			Repair of starter
			Fuses and relays
			Windscreen
			Schematic diagrams of electrical equipment
		Body and Equipment

Removal, survey and installation of generator brushes

PERFORMANCE ORDER

Disconnect the negative battery terminal.
Remove the air filter and, depending on the equipment, take the air conditioning compressor without disconnecting the tube. Depending on the model, it may be necessary to remove the generator.
Remove the mounting screws and remove the box of the voltage regulator and brush the back of the generator.
If the height is less than any minimum brushes (5 mm) Unsolder lead wires and remove the brush and a spring.
Wipe the contact rings of the generator with a cloth dampened with gasoline. If they are very dirty, they smooth out fine sandpaper (10-M40) and wipe with a cloth.