 printable version
Removal and installation of the vacuum pump (diesel engines)
Models 463.323 (M612) Details of the installation of the vacuum pump models 463.323 (M612)
| - Remove viscous fan clutch cooling system (see chap. System of cooling, heating, ventilation and air conditioning).
- Releasing the latch (3), disconnect from the pump (2) the vacuum line (1).
- Turn out fixing bolts and pulling forward, remove the vacuum pump (2).
- Installation is in the reverse order - track correctness of landing driver on the back of the pump assembly, do not forget to replace the defective sealing elements.
|
|
Models 463.333 (M628) Details of the installation of the vacuum pump models 463.333 (M628)  | | |
| - Remove the air cleaner and the air intake with integrated sensor MAF (see chap. Power supply system and exhaust).
- Release of the lock body parts in the right air intake duct.
- Remove the trim panel with the oil filler cap.
- Remove the retaining bolt (4) and pull in the direction of the air duct (5) on the cylinder head cover (6).
- Remove the cover (7).
- Remove the bolts (8) and remove the guide on the cylinder head cover (6) Cable box (9).
- Poddomkratte car and establish it on props.
- Remove the activator throttle body assembly with the upper airways (see chap. Power supply system and exhaust).
- Remove the guide tube probe level measurement of motor oil.
- Release the clips (3) and disconnect from the pump assembly (2) the vacuum line (1).
- Turn out fixing bolts and, leaning forward, remove the vacuum pump (2).
- Installation is in the reverse order - track correctness of landing driver on the back of the pump assembly, do not forget to replace the defective sealing elements.
|
|
|
