add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Patrol (from 1988 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Nissan Patrol
Home
 
Nissan
Patrol
Introduction
Troubleshooting
Adjustment and routine maintenance
Engine
System of cooling, heating and air conditioning
The power supply system and exhaust
Systems for reducing emissions
Systems of an electric motor
Transmission
Clutch
Brakes
The front and rear axles, chassis and steering
Body
Care body
Removing stains of different origin with vinyl upholstery and trim panels
Care of an upholstery and rugs salon
Repair minor damage to body panels
Repair of considerable damages of a body
Replacing the windscreen and of fixed glass panes
Service of the front door
Maintenance rear doors
Removing and installing bonnet
Service tailgate models of Hardtop (Hardtop) and Universal (Station Wagon)
Service tailgate models of utilities (Van) (Utility)
Removing and installing radiator grille
Removing and installing center console
Removal and installation of the front seats
Removing and installing rear seat
Service seatbelts
Removal and installation of the instrument panel
Onboard electric
 


Hit Counter by Digits


print page printable version

Removing and installing rear seat



Models of Hardtop (Hardtop)

Withdrawal

PERFORMANCE ORDER

  1. At the rear of the car fold back the rear seat cushion.
  1. Lift the mat and give him beneath the hinge bolts seat (see. Accompanying illustration).
  1. Remove the seat of the car.

Setting

Installation is in the reverse order.

PERFORMANCE ORDER

  1. Before installation grease sealing fixing bolts.
  2. Move the seat back, making sure of reliability of fixing it in the locking mechanism of the seat.

Touring models (Station Wagon)

Backseat

Withdrawal

PERFORMANCE ORDER

  1. Remove from the back of the rear seat head restraints, which press the locking tab on one of the slides of the head restraint.
  2. At the rear, lift the seat cushion forward and take a seat mounting bracket bolts to the floor.
  3. Give bolts and brackets to the rear seat floor panel.
  4. Remove the seat of the car.

Setting

Installation is in the reverse order.

Do not forget to lubricate the fixing screws sealant.

The third seat

Withdrawal

PERFORMANCE ORDER

  1. At the rear of the car fold forward the seat cushion.
  2. Give bolts of loops of the third seat (see. Accompanying illustration).
1 - the third seat
2 - bolts
  1. Remove the seat from the passenger compartment.

Setting

Installation is in the reverse order.

PERFORMANCE ORDER

  1. Do not forget to lubricate the fixing screws sealant.
  2. Move the seat back, making sure of reliability of fixing it in the locking mechanism of the seat.




« previos page
Removal and installation of the front seats
next page »
Service seatbelts

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.