| 1. Disconnect the negative battery cable. |
 | 2. Disconnect the vacuum hose from the fuel pressure regulator (arrow), which is mounted on the left side of the fuel reservoir. |
| 3. Release the pressure in the fuel system, the instructions given in Section 6.3.2.6. Loosen the clamp and disconnect the fuel hose from below the fuel pressure regulator. |
| 4. Remove the two mounting bolts and remove the regulator from the fuel reservoir. Remove the O-ring mounted on the controller, and dispose of it - should be used when installing a new one. |
| 5. Installation is spent upside-down removals. At installation use a new sealing ring. After installation, start the engine and check for fuel leaks. |
See precautions in 