REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Sunny
		Instructions
		Maintenance
		Engines
		Cooling
		Heating and ventilation system
		Fuel and exhaust system
			Carbureted engines
				Technical data
				Air filter
				The thermostat air flow
				Fuel pump
				Fuel Level Sensor
				Fuel tank
				The accelerator cable
				Throttle pedal
				Fuel
				Carburetor
					Removal and installation of the carburetor
					Diagnostics, disassembly, and adjustment of the carburetor
				Sensors and valves carburetor
				Suction collector
				An exhaust manifold
				Exhaust system
			Engines with fuel injection system
			The power supply / exhaust
			Emission of exhaust gases
		The system of the engine is started
		Coupling
		Transmissions
		Axles
		Brakes
		Suspension and steering
		Body
		Electrical

Removal and installation of the carburetor

Withdrawal

PERFORMANCE ORDER

1. Disconnect the battery from weight and partially drain the coolant.
2. Remove the air filter.
3. Disconnect the throttle cable.
	4. Disconnect the wiring carburetor.
	5. Disconnect and plug the fuel hose (arrow Set collar).
6. Mark all hoses and disconnect them from the carburetor.
7. Remove the 4 screws and remove the carburetor, remove the heater or heat insulator (for vehicles with catalytic converter).
8. Turn off the hole in the manifold.

Setting

PERFORMANCE ORDER

1. Installation is performed in reverse order.

2. Before installation, check the cleanliness of the mating surfaces manifold and carburetor.

3. Adjust the throttle cable.

4. Add a liquid.

5. Check and, if necessary, adjust the idle speed and the quality of the mixture.

« previos page
Carburetor