1. The shift lever is in the rest position, must be installed on the line incorporating the 3rd-4th gear. |
2. Press the clutch pedal, start the engine and after 3-6 seconds, make a trial to include all transfers. |
3. If the gear shift is not clear, check the rise of the switching shaft in the following way. |
4. Turn on the first transmission. |
| 5. Click on the gear shift lever to the left, then release the lever and measure the vertical movement of the shaft gear selection mechanism, which should be 1 mm. |
| 6. To adjust, loosen the nut (A) securing the hinge to the lever and gear pre-selection by moving the hinge in the slot of a cable rope, set the desired movement of the shaft. |
7. Tighten the cable nut torque of 15 Nm. |
8. Replace the protective cover of the gear lever. |