REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf IV (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Golf 4
		Instructions
		Engine
		Cooling system
		Fuel System
		Exhaust system
		Ventilation and heating system
		Coupling
		Transmission
			Removing and installing transmission
			Removing and installing automatic transmission
			The gear change mechanism
			Removal and installation of the case shift lever
			Adjust the shift cable
				Engines 1,4- / 1,6-I
				Engines 1,8- / 1,9- / 2,3-I
				Check adjustment
			Full automation
			Adjustment of draft of a cable shift lever
		Suspension brackets and power shafts
		Steering
		Wheels and tires
		Brakes
		Body
		Electrical equipment and wiring

Check adjustment

PERFORMANCE ORDER

1. The shift lever is in the rest position, must be installed on the line incorporating the 3rd-4th gear.
2. Press the clutch pedal, start the engine and after 3-6 seconds, make a trial to include all transfers.
3. If the gear shift is not clear, check the rise of the switching shaft in the following way.
4. Turn on the first transmission.
	5. Click on the gear shift lever to the left, then release the lever and measure the vertical movement of the shaft gear selection mechanism, which should be 1 mm.
	6. To adjust, loosen the nut (A) securing the hinge to the lever and gear pre-selection by moving the hinge in the slot of a cable rope, set the desired movement of the shaft.
7. Tighten the cable nut torque of 15 Nm.
8. Replace the protective cover of the gear lever.