|
printable version
Removing and installing oil pan
Withdrawal PERFORMANCE ORDER | 1. Remove the bottom mudguard of the engine. | 2. Drain the engine oil by loosening the oil drain plug about half a turn. Place the container for oil plum under a drain stopper and unscrew a stopper completely. If necessary, press a stopper when unscrew that oil did not proceed prematurely. | 3. When the oil has completely drained, screw the oil drain plug in place. | 4. Remove the two or three bolts securing sump to gearbox housing. | 5. Unscrew bolts and remove oil pan from the engine block. |
| The moments of a tightening of the oil drain plug: | - Engines 1,4- / 1,6-I | 30 Nm | - The engine 1,8-I | 40 Nm | - The engine 2,3-I | 20 Nm |
Setting
|
|