printable version
Brake Cable
Removal in the following order: - Press the knob locks, located in the lower back and pulling, remove the handle 2 of the lever 1, the parking brake; - Remove the top decorative overlay of the lever 3; - Remove the rear of the center console; - Unscrewing the lock nuts and adjusting nuts, remove them from the threaded tip of a cable of a manual brake; - Unscrew the two screws securing the lever to the floor and remove the lever 1 with the compensator 6; - Loosen the screws of the rear wheels, to bring the back of the car and fix it on a support post; - Remove the bolts of the rear wheels and remove the wheels; - For vehicles with brake drum brake drum remove and disconnect the cable from the parking brake lever;
| Fig. 12.29. Fixing the parking brake cable to the rear disc brakes
|
- On models with rear disc brakes, disconnect the cable from the rear caliper (Fig. 12.29);
| Fig. 12.30. Fixing the cable into the clamping fixture
|
- Remove the cable from its mounting clamp and remove it from the vehicle (Fig. 12.30). Installation of cables spend to sequences, return to removal. Please note that the parking brake cables for each of the parties to have their principle of installation. The parking brake cable for vehicles with disc and drum rear brakes are different from one another. The cable on the right rear wheel has a blue label, which should be centered on the mounting clip. The cable on the left rear wheel has a white label, which should be centered on the mounting clip. Spend adjust parking brake cable, then set the rear of the center console and the trim lever.
|