REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B6 (from the year 2004)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Passat B6
		Operation and maintenance of car
		Engine
			Overview
			Mechanical (engine capacity of 1.6 liters)
				Removal and installation of the top casing of the engine
				Check the timing belt (4-cyl. Petrol engines of 1.6 liters)
				Removing Engine
				Engine installation
				Disassembly and assembly of the engine
				Removing and installing V-ribbed belt
				Removing and installing timing cover
				Replacing crankshaft oil seal on the side of the pulley
				A method of tightening the mounting bolt sprocket belt drive
				Dismantling and assemblage of pistons and rods
				Cylinder Head
				Checking the valve timing
				The timing
				Removing and installing the camshaft housing
				Removal and installation of the cylinder head
				Compression Test
				Repair the valve mechanism
				Checking the valve guides
				Replacing valve stem seals
			Lubrication system
			Cooling system
			Fuel Injection System
			The mechanical part (petrol engines of 2.0 liters)
			Lubrication system
			System ohlazhdeiya
			Fuel system
			Injection system
			System of release of gases otrabotavschih
			Ignition system
			The mechanical part (diesel engines of 2.0 liters)
			Lubrication system
			Cooling system
			Fuel system
			Turbocharging turbo running on exhaust
			The direct injection diesel
			Exhaust
			Tables
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body
		diagrams

printable version

Removal and installation of the top casing of the engine

ATTENTION

When installing the engine cover, namely when fixing it to the fixing points, do not use brute force or use tools. Otherwise, you may damage the engine cover.

Withdrawal

Fig. 2.1. Dipstick

Remove the dipstick 1 (Fig. 2.1).

Fig. 2.2. Plug and hose connection

Disconnect the plug with hose connection and B (Fig. 2.2).

Loosen the clamp A and remove the hose.

Unlock the engine cover at the points of attachment and remove it upwards.

Setting

Place the engine cover by inserting the tabs at the anchor points 2 and press it so that the latches lock.

Connect the hose connection C and B.

Push the hose and tighten the clamp B.

Insert the dipstick into the guide tube.

« previos page
Mechanical (engine capacity of 1.6 liters)

next page »
Check the timing belt (4-cyl. Petrol engines of 1.6 liters)