add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Technical data
Check of a free wheeling of a steering wheel
Checking steering angle of front wheels
Check torque pin of the spherical rod end
Check of effort steering
Checking the steering wheel return to its original position
Checking the belt drive power steering pump
Check the fluid level
Liquid replacement in a hydraulic drive power steering
Bleeding the hydraulic system of the power steering
Checking the fluid pressure in the hydraulic system
The steering column / steering shaft
Removing and installing steering column lock
Steering transfer
The power steering hoses
Filling fluid Power Steering
Power steering pump
Troubleshooting steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Technical data



Technical data

Power Steering

Name
Specification
The steering shaft
A universal joint and adjustable angle
Steering transfer
Rack and pinion
Progress rack
144 ?� 1 mm
Type of power steering pump
Vane
Turn the steering wheel from lock to lock
3.15
Pump capacity, cm 3
9.6

Adjusting data

Data
Value
Steering Wheel Play mm
0-30
The angle of rotation of the wheels

- Inner wheel

1 ?� 40 '?� 2 ?�

- Outer wheel

33 ?� 45 '
The force of the steering wheel H
29
Deflection of a belt drive power steering pump when pressed with a force of 98 N
6-9 mm
The pump pressure, MPa
8.3-8.8
Full pre-load gear, N ??? m
0.6-1.3
Moment of the steering wheel N ??? m
2-5

Lubricants

Data
Value
Bearing steering shaft ALVANIA 2 or 3 (KEUK DONG SHELL)
The spherical rod end SHOWA SUNLIGHT MB-2, or equivalent
Carter steering transfer ONE-LUBER RP GREASE (KYODOYUSHI, JAPAN)
Axial ball joint steering transfer LONG TIME PD2 (OPTIMOL, GERMAN)
The contact surface of a protective cover of steering transfer Silicone grease (SPEC NO: MS511-41)
Fluid power steering Fluid power steering (PSF-3), 0.75-0.8 l

Tightening torques, N ??? m

Data
Value
Nut steering wheel
35-45
Mounting bracket of the steering column
13-18
The steering shaft to the hinge
15-20
Pinion shaft to the hinge
15-20
Bolt protective cover
17-26
Bolts of fastening of steering transfer
60-80
Locknut tie rod
50-55
Locknut cork
24-34
Tie rod end to the rack
80-100
The valve housing to the housing of the rack
20-30
Clamp mounting supply and return pipe to the steering transmission
12-18
Self-locking nut transfer and non-return valve
20-30
Stilling
12-18
The oil pump to the bracket
35-50
Mount the oil pump to the engine
35-50
Pressure hose to the oil pump
55-65
Bolt oil reservoir
4-6

general information

The steering consists of a steering wheel, steering column, steering gear and rack and pinion steering gear. The steering wheel is fixed on the steering column shaft and transmits power to the gear rack gear.

On each side of the rack steering gear is connected with a ball joint tie rod. The steering traction force transmitted through the steering tips and rotary fists to the front wheels. This design has a light steering the course with no play by turning the steering wheel from lock to lock.

To facilitate the steering wheel mounted hydraulic power steering system, consisting of a power steering pump, driven by a belt from the crankshaft, fluid reservoir, hoses and tubes, and the steering gear.





« previos page
Steering
next page »
Check of a free wheeling of a steering wheel

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.