printable version
ABS control unit
1 - bolts; 2 - a socket; | 3 - the block of management ABS. |
ABS control unit performs the following functions:
- Controls the ABS; - Calculates the speed of the car; - Carries out a self-test of the system: a self-diagnostic fault codes, and safety functions shall be stored in two separate microprocessors.
ABS control unit continuously checks for blockage of each wheel and controls all the valves to adjust the brake fluid pressure, if a lock is detected. ABS control unit also checks that the components are operating properly, and turns off the ABS, in case of failures. Then the brake system works like a standard braking system, the warning lamp ABS.
Withdrawal
PERFORMANCE ORDER | 1. Disconnect the negative battery terminal. | 2. Remove the seat on the passenger side. | 3. Further Removal spend in the sequence shown in the figure. | 4. Installation spend to sequences, return shown on drawing, taking into account the following. | 5. After connecting the wires to the negative terminal of the battery, make sure that the erased fault codes. |
|
|