REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		ACP G4A-EL
		AKP 50-40 LE
		Axes and power shafts
		Steering
		Wheels and tires
		Suspension
		Body
		The air conditioning system
		Electrical equipment
		Brakes
			Technical data
			Bleeding the hydraulic system of a drive of brakes
			Checking the brake tubes and hoses
			Replacement brake hoses
			Installation height of the brake pedal
			Free running of the brake pedal
			The distance from the floor of the brake pedal
			Brake pedal
			Check the brake light switch
			The main brake cylinder
			Check the brake servo
			The front disc brake
			Rear Disc Brake
			Pressure regulator
			Parking brake
			Anti-lock brakes (ABS)
			The list of codes of malfunctions of brake system
			Precautions during repair
			Bleeding the hydraulic system of a drive of brakes
			Hydraulic control unit (HCV)
			ABS control unit
			Wheel speed sensor
			Rotor front sensor
			Main inspection
			Checking functionality
			Troubleshooting
		Electric schemes

Replacement brake hoses

Withdrawal

PERFORMANCE ORDER

	1. Special wrench, unscrew the coupling nut of a brake tube from the hose.
	2. Loosen the clamp and remove the brake hose from the bracket.

Setting

PERFORMANCE ORDER

	1. Install the brake hose in an arm and fix its clip.
	2. Connect the brake hose to brake tube and special key tighten the coupling nut. Torque: 13-22 N ??? m
A warning Make sure that the hose is not kinked. Make sure that the hose does not touch other parts of the body with the vibrations of the car and turned to the full left or right wheels.
	3. Repeatedly press the brake pedal and check for leakage from the brake hose and its connection to a brake tube.
4. Check the brake fluid level, which should be between labels MAX and MIN, located on the wall of a transparent popolnitelnogo tank.
	5. Remove air from the hydraulic system of a drive of brakes.
6. Make sure that the fluid level in the reservoir is between labels MAX and MIN.
7. Top up the coolant if the level is below the MAX mark.