printable version
Rear Disc Brake
1 - the parking brake cable, the bracket; 2 - connecting bolt; 3 - the brake hose; 4 - lock bolt; 5 - a support; 6 - V-shaped spring; | 7 - disc brake pads; 8 - a lining; 9 - directing the brake pads; 10 - a bolt; 11 - mounting support. |
Refitting
PERFORMANCE ORDER | 1. Removal spend in the sequence shown in the figure. | 2. Check the condition of all details and, if necessary, repair or replace them. | 3. Installation spend to sequences, return shown on drawing, taking into account the following. |
|
Check
PERFORMANCE ORDER | 1. Measure the thickness of the disc brake pads The thickness of the brake pads: Rated: 7,5-8,3 mm The minimum allowable: 1.5 mm | 2. Measure the thickness of the beating and the brake disc. Brake Disc Thickness: Par: 10 mm The minimum allowable: 8 mm Maximum allowable runout: 0.1 mm. | |
|
|