The DTC | Defective item | possible cause |
1111 | All connectors and wiring | Faulty wiring or connectors |
1112 | The inlet valve (FL) | Faulty valve, wiring, or ABS control unit |
1132 | Exhaust valve (FL) | |
1114 | The inlet valve (FR) | |
1134 | Exhaust valve (FR) | |
1211 | The inlet valve (RR) | |
1213 | Exhaust valve (RR) | |
1212 | The inlet valve (RL) | |
1214 | Exhaust valve (RL) | |
2234 | Main relay and the main fuse | Faulty main relay, the main fuse or wiring HCV |
1233 | The wheel speed sensor (FL) | Faulty wiring |
1241 | The wheel speed sensor (FR) | A problem occurs from time to time due to the sensor coil circuit or wiring |
1243 | The wheel speed sensor (RR) | Damage to the sensor rotor or the rotor gap between the sensor and the sensor is too large or too small |
1311 | The wheel speed sensor (RL) | Noise caused by improper installation, or loss of wheel sensor or too large a gap between the rotor and the sensor probe |
4133 | It does not work the pump motor | Mechanical or electrical failure of the electric pump unit |
1313 | Insufficient pressure created by the pump | Low pressure hydraulic |
1313 | Insufficient pressure created by the pump | Low pressure hydraulic |
- | ABS warning lamp lights up, but does not signal a fault codes | Faulty electrical circuit or low brake fluid level |
