REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		ACP G4A-EL
		AKP 50-40 LE
		Axes and power shafts
		Steering
		Wheels and tires
		Suspension
		Body
		The air conditioning system
		Electrical equipment
		Brakes
			Technical data
			Bleeding the hydraulic system of a drive of brakes
			Checking the brake tubes and hoses
			Replacement brake hoses
			Installation height of the brake pedal
			Free running of the brake pedal
			The distance from the floor of the brake pedal
			Brake pedal
			Check the brake light switch
			The main brake cylinder
			Check the brake servo
			The front disc brake
			Rear Disc Brake
			Pressure regulator
			Parking brake
			Anti-lock brakes (ABS)
			The list of codes of malfunctions of brake system
			Precautions during repair
			Bleeding the hydraulic system of a drive of brakes
			Hydraulic control unit (HCV)
			ABS control unit
			Wheel speed sensor
			Rotor front sensor
			Main inspection
			Checking functionality
			Troubleshooting
		Electric schemes

Installation height of the brake pedal

A warning

To adjust the power on lamp stoplight loosen the lock nut (B) and make the adjustment by turning the screw (A).

Check

PERFORMANCE ORDER

Measure the distance from the center of the upper side of the brake pedal pad to pad.

Distance: 236-241 mm

Adjustment

PERFORMANCE ORDER

1. Loosen (D) and adjust the height of the pedals by turning the pusher (C).

2. After adjustment, tighten the lock nut (D).

The inhaling moment: 23,5-34,3 N ??? m

3. After adjustment, check the free travel and the time of switching on the lamp stoplight.