REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		ACP G4A-EL
		AKP 50-40 LE
		Axes and power shafts
		Steering
		Wheels and tires
		Suspension
		Body
		The air conditioning system
		Electrical equipment
		Brakes
			Technical data
			Bleeding the hydraulic system of a drive of brakes
			Checking the brake tubes and hoses
			Replacement brake hoses
			Installation height of the brake pedal
			Free running of the brake pedal
			The distance from the floor of the brake pedal
			Brake pedal
			Check the brake light switch
			The main brake cylinder
			Check the brake servo
			The front disc brake
			Rear Disc Brake
			Pressure regulator
			Parking brake
			Anti-lock brakes (ABS)
			The list of codes of malfunctions of brake system
			Precautions during repair
			Bleeding the hydraulic system of a drive of brakes
			Hydraulic control unit (HCV)
			ABS control unit
			Wheel speed sensor
			Rotor front sensor
			Main inspection
			Checking functionality
			Troubleshooting
		Electric schemes

Free running of the brake pedal

Check

PERFORMANCE ORDER

1. With the engine turned off, press the brake pedal several times to remove any backlash in the system.
2. Remove the spring clip and make sure the holes on the fork and the pedals are the same, then install the clamp.
	3. Hand press the brake pedal before occurrence of notable resistance and measure a pedal free wheeling. Free running of the brake pedal: 4-7 mm

Adjustment

PERFORMANCE ORDER

1. Remove the spring clip and pin.
	2. Loosen the lock nut (D) and align the holes on the fork and the pedals turn pusher (C).
3. Install the pin and spring clip.
4. Tighten the lock nut (D). The inhaling moment: 23,5-34,3 N ??? m
5. After adjusting the pedal height check and stop lamp switch signal.