 printable version
Parking brake
1 - housing;
2 - an adjusting nut;
3 - a returnable spring;
4 - Front parking brake cable; | 5 - a nut;
6 - lock;
7 - rear parking brake cable. |
Check
| PERFORMANCE ORDER |  | Make sure that the course of the lever corresponds to the following values when lifting it with a force of 98 N (10 kgf).
Stroke: 5-7 clicks |
|
Adjustment
| PERFORMANCE ORDER | | 1. Before adjusting start up the engine and repeatedly press the brake pedal when the vehicle is reversing. | | 2. Turn off the engine. | | 3. Remove the bolt and remove the brake lever. |  | 4. Remove the clamp adjusting nut and turn the adjusting nut in front of the parking cable. | 5. After the adjustment, check the following:
- Switch on the ignition, lift the brake lever on one click, and make sure the warning lamp lit;
- Check for jamming the rear brake. |
|
Refitting
A warning  Adjust the parking brake lever stroke.
Repeatedly press the brake pedal and check for jamming the brakes at the rear wheel is rotated by hand.
| PERFORMANCE ORDER | | 1. Removal spend in the sequence shown in the figure. | | 2. Check the condition of all details and, if necessary, repair or replace them. | | 3. Installation spend to sequences, return shown on drawing. |
|
|
