REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		ACP G4A-EL
		AKP 50-40 LE
		Axes and power shafts
		Steering
		Wheels and tires
		Suspension
			Technical data
			Adjustment of corners of installation of forward wheels
			Adjustment of corners of installation of back wheels
			Front suspension with spring
			Repair strut front suspension
			Lower arm front suspension
			Front stabilizer
			Thrust the front stabilizer bar
			Traverse
			The rear spring strut
			Repair the rear spring strut
			Rear anti-roll bar
			Link rear stabilizer bar
			Transverse and longitudinal traction
			Rear cross member
			Troubleshooting
		Body
		The air conditioning system
		Electrical equipment
		Brakes
		Electric schemes

printable version

Rear cross member

1 - rear stabilizer;
2 - track rod (rear);
3 - a bolt;

4 - rear cross member;
5 - track rod (front);
6 - a dynamic damper.

Refitting

PERFORMANCE ORDER

1. Jack up the rear of the car and establish it on reliable support.

2. Remove the wheels.

3. Removal spend in the sequence shown in the figure.

4. Check the condition of all details and, if necessary, repair or replace them.

5. Installation spend to sequences, return to removal, taking into account the following.

6. Install the wheel.

Torque: 88-118 N ??? m

7. Install the rear crossmember, measure the wheel alignment parameters and, if necessary, adjust it.

A warning

Secure the bracket and tightening the bolt stabilizer lateral thrust is not to end, lower the car and tighten all bolts and nuts the demanded moments in not loaded condition.

« previos page
Transverse and longitudinal traction

next page »
Troubleshooting