REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Rio
		Instructions
		Engines A3E, A5D
		Greasing system
		Cooling
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Wheels and tires
		Steering
		Brakes
		Body
			Tightening torques
			Hood
			The trunk lid
			The hinge lid
			Tailgate
			Gas-filled strut support tailgate
			Castle tailgate
			The external handle of the tailgate
			The front door
			Conformal door seal
			Backdoor
			Dashboard
			Ceiling
			Side trunk trim five-door cars
			The rear trunk trim
			The upper pillar trim
			The bottom upholstery of the central rack
			The top upholstery of the central rack
			Pillar trim four-door cars
			Pillar trim five-door cars
			Front side door trim
			Cover the front door sill
			Rear door trim
			Upholstery tailgate
			Cover rear door sill
			Rear shelf
			Upholstery rear wheel arches four-door cars
			Upholstery of an arch of a back wheel of five-door cars
			Front bumper
			Rear bumper
			The front seats
			Upholstery front seatback
			The upholstery of the front seat
			Headrest
			The leaning back hinge of a forward seat
			Rear seat
			Seat belts
			Rear seat belts
			Bracket rear seat belt
			The distances designed on a plane, for check of distances between separate points of a car body
			Actual distances of check of distances between separate points of a body of the car
		The air conditioning system
		Electrical equipment

Castle tailgate

Withdrawal

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.
2. Move aside the mounting plate spare wheel.
3. Open the tailgate.
4. Remove the top stoplight.
	5. Remove the tailgate trim.
	6. Disconnect the outside door handle lock rod, cylinder lock and activator lock.
7. Disconnect the electrical connector from the castle.
8. Remove the two screws on the lock.
9. Remove the locking tailgate.

Setting

PERFORMANCE ORDER

1. Set the lock in the tailgate.
2. Connect the electrical connector to the castle.
	3. Replace the two screws on the lock.
4. Connect the outside door handle lock rod, cylinder lock and activator lock.
5. Refit the tailgate.
6. Establish the top stoplight.
7. Close the tailgate.
8. Attach the wire to the negative terminal of the battery.