printable version
The trunk lid
The trunk lid 1 - lock cylinder trunk; 2 - locking lid; 3 - shock plate lid; 4 - spring lid support; | 5 - the tailgate; 6 - the hinge lid; 7 - profiled sealing strip. |
The boot lid is attached to the body with two hinges. The two hinges are connected with each other and the two springs are bolted. Springs help to open the trunk lid and keep it in the open position.
Profiled sealing strip, fixed on a ledge lid prevents leakage between the trunk and the body.
The latch is attached in the center of the base of the trunk lid. Position is adjustable lid. Withdrawal PERFORMANCE ORDER | 1. Lift the lid of the trunk. | A warning Removing the lid spend with the assistant.
| 2. Support the boot lid in the open position. | 3. Remove the four screws on the hinges lid and remove the lid of the trunk. | 4. Remove the rubber stops the tailgate. |
|
Setting A warning Install tailgate spend with the assistant.
PERFORMANCE ORDER | | 1. Install the trunk lid is carried out in reverse order of removal. | 2. Hand tighten the bolts fastening lid hinges. | 3. Close the lid of the trunk. | | 4. Check and, if necessary, adjust the position of the lid relative to adjacent surfaces before tightening the bolts. Torque: 9-13 N ??? m | 5. Check the relative position of the lock lid and lock the shock plate. If necessary, loosen the bolts and moving the shock plate to adjust its position. Torque: 7-10 N ??? m |
|
|