REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Rio
		Instructions
		Engines A3E, A5D
		Greasing system
		Cooling
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Wheels and tires
		Steering
		Brakes
		Body
			Tightening torques
			Hood
			The trunk lid
			The hinge lid
			Tailgate
			Gas-filled strut support tailgate
			Castle tailgate
			The external handle of the tailgate
			The front door
			Conformal door seal
			Backdoor
			Dashboard
			Ceiling
			Side trunk trim five-door cars
			The rear trunk trim
			The upper pillar trim
			The bottom upholstery of the central rack
			The top upholstery of the central rack
			Pillar trim four-door cars
			Pillar trim five-door cars
			Front side door trim
			Cover the front door sill
			Rear door trim
			Upholstery tailgate
			Cover rear door sill
			Rear shelf
			Upholstery rear wheel arches four-door cars
			Upholstery of an arch of a back wheel of five-door cars
			Front bumper
			Rear bumper
			The front seats
			Upholstery front seatback
			The upholstery of the front seat
			Headrest
			The leaning back hinge of a forward seat
			Rear seat
			Seat belts
			Rear seat belts
			Bracket rear seat belt
			The distances designed on a plane, for check of distances between separate points of a car body
			Actual distances of check of distances between separate points of a body of the car
		The air conditioning system
		Electrical equipment

Rear seat belts

Withdrawal

PERFORMANCE ORDER

	1. Remove the rear seat cushion.
2. Turn out one bolt belt to the bracket.
	3. Slowly release the belt to retract his seat-belt tensioners as possible.
4. Remove the top stoplight.
5. Remove the three screws on the rear seat.
6. Remove the rear seatback.
7. Remove the rear parcel shelf.
8. Remove the C-pillar trim.
9. Remove the two screws on belt tensioner.
10. Remove the belt tensioner.

Check

PERFORMANCE ORDER

1. From the luggage check three point seat belt anchorages.

2. Verify the location of the seat belts.

3. Pull the seat belt to the rear between the seatback and cushion.

4. Remove the rear seat cushion.

5. Release connectors of fastening of furnish of a back rack to the body and remove the C-pillar trim.

6. Lift the back of the rear seat and tilt it forward.

7. Check for loose belt tensioners.

Setting

PERFORMANCE ORDER

1. Set the inertial belt tensioner and fasten one bolt and screw. Torque: 40-55 N ??? m
2. Install the C-pillar trim.
3. Install the rear parcel shelf.
4. Establish the top stoplight.
	5. Install the rear seat.
6. Screw one bolt of a lap belt to the bracket. Torque: 40-55 N ??? m
	7. Install the rear seat cushion.

« previos page
Seat belts