 printable version
Hood
Hood 1 - Joint hood;
2 - hood;
3 - WATERPROOF band;
4 - WATERPROOF wing stripe;
5 - rubber stop; | 6 - support the hood;
7 - lock hood;
8 - a cable of opening the bonnet. |
Hood alligator type, which opens from the front of the car and locked the standard double unlocking mechanism.
Handle opening the bonnet is located on the left side below the instrument panel.
When you open the hood pivots on two hinges and locked in the open position support. Each hinge is fixed with two screws to the body and the two bolts to the hood.
To adjust the hood it can be moved by the elongated holes for bolts hood hinges.
Hood latch can be adjusted in two planes to ensure the optimal position of the lock of a cowl and a shock plate. Withdrawal | PERFORMANCE ORDER | | 1. Open the hood and fix it on a support. | | 2. Support the hood so that it does not fall after reversing of bolts of hinges. |
A warning  Removing the hood spend with assistants.
|  | 3. Remove the four screws on the hinges of the hood. | | 4. Remove the bonnet with the bonnet support. | | 5. Remove the hood. |
|
Setting
| PERFORMANCE ORDER | | 1. Installation of the hood is held in reverse order of removal. | | 2. Tighten the bonnet by hand. | | 3. Close the hood. |  | 4. Check the clearance around the perimeter of the hood. If necessary, moving the hood to the elongated holes for bolts fastening the hood, adjust the hood so that the gaps around the perimeter are uniform and consistent with the desired value. After adjusting the position, tighten the screws of the hood. Torque: 19-26 N ??? m |  | 5. Check the alignment of the locking mechanism and a shock plate of the hood.
If necessary, loosen the screws and adjust the position by moving the shock plate hood.
Torque: 8-11 N ??? m
|
|
|
