| 1. Install the instrument panel in the car. Before installing the instrument panel make sure that the steering wheel is correctly installed through a T-shaped rod with wiring harness. Otherwise, the steering column may not be properly installed. |
| 2. Connect the wiring harness connector and the instrument panel. |
 | 3. Replace the four screws on the left / right side of the base of the dashboard. Torque: 18-25 N ??? m |
 | 4. Replace the four screws on the left / right side of the T-shaped connector. Torque: 18-25 N ??? m |
| 5. Install the glove box. |
 | 6. Install the radio in the following order:
- Connect the antenna to the back of the radio;
- Connect the electrical connector to the back of the radio;
- Replace the four screws that secure the radio. |
 | 7. Set the center trim panel and the control panel heating and ventilation. |
 | 8. Install the instrument cluster in the following order:
- Connect the electrical connector to the rear of the instrument cluster;
- Screw the four screws on the instrument cluster;
- Screw the three screws that secure the finish of the instrument cluster. |
| 9. Set the opening bonnet. |
10. Replace the two screws on either side of the steering column, which connect the instrument panel and steering column. Torque: 18-26 N ??? m |
| 11. Establish a steering wheel, turn signal switch and the upper and lower casings of a steering column. |
| 12. Install the driver airbag. |
| 13. Install the central console. |
| 14. Connect the cable to the negative terminal of the battery. |
