add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Rio
Home
 
Kia
Rio
Instructions
Engines A3E, A5D
Greasing system
Cooling
Fuel system
Technical data
Fuel system
Ignition timing
The idle speed
Air flow meter sensor
Knock sensor
Throttle Position Sensor
Check the main relay
Checking the fuel pump relay
Check the voltage of the front and rear heated oxygen sensors
Checking the front and rear heated oxygen sensors
Removing the pressure in the fuel system
Fuel lines
Activation of the fuel system
Check of residual pressure in the fuel system
Check fuel lines
Checking the fuel injector
Quick connections
Fuel pump
:20. Fuel tank
Check crankcase ventilation (PCV)
Checking system EVAP
Check valve system EVAP
Check of the valve closing of the canister
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Wheels and tires
Steering
Brakes
Body
The air conditioning system
Electrical equipment
 


Hit Counter by Digits


print page printable version

Check crankcase ventilation (PCV)



PERFORMANCE ORDER
1. Start the engine and warm it up to normal operating temperature.
2. Leave the engine to work with the idle speed.
3. Disconnect the hose from the crankcase ventilation cylinder head cover.
4. Use your finger to close the crankcase breather hose.
5. Make sure that the vacuum hose is felt.
6. Remove the crankcase ventilation valve.
7. Purge valve at side A, while the B-side should be air.
8. Purge valve B-side, while the A-side must not be air.
9. If necessary, replace the valve.




« previos page
:20. Fuel tank
next page »
Checking system EVAP

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.