REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Rio
		Instructions
		Engines A3E, A5D
		Greasing system
		Cooling
		Fuel system
			Technical data
			Fuel system
			Ignition timing
			The idle speed
			Air flow meter sensor
			Knock sensor
			Throttle Position Sensor
			Check the main relay
			Checking the fuel pump relay
			Check the voltage of the front and rear heated oxygen sensors
			Checking the front and rear heated oxygen sensors
			Removing the pressure in the fuel system
			Fuel lines
			Activation of the fuel system
			Check of residual pressure in the fuel system
			Check fuel lines
			Checking the fuel injector
			Quick connections
			Fuel pump
			:20. Fuel tank
			Check crankcase ventilation (PCV)
			Checking system EVAP
			Check valve system EVAP
			Check of the valve closing of the canister
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Wheels and tires
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment

printable version

Quick connections

A warning

The fuel system is under pressure even after the engine is switched off, therefore before a detachment of pipelines it is necessary to remove pressure in fuel system.

Compound

PERFORMANCE ORDER

	1. Pull the quick flange connection to the pipe to clear it locks (clicks).
	2. After connecting the hose pull in different directions (A and B) two parts of quick connector and make sure the connectors are secure fixation, it does not click connection holders.

Disconnection

PERFORMANCE ORDER

1. Remove the fuel pressure.
	2. Click the quick release flange connection in the direction A.
3. Compress both holders and disconnect the connection by pulling the flange in the direction B. When disconnecting, do not apply a lot of effort.

« previos page
Checking the fuel injector

next page »
Fuel pump