add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)
general info. full specifications. diagnostics. hints. tips. tricks
 Kia Rio
Home
 
Kia
Rio
Instructions
Engines A3E, A5D
Greasing system
Cooling
Fuel system
Technical data
Fuel system
Ignition timing
The idle speed
Air flow meter sensor
Knock sensor
Throttle Position Sensor
Check the main relay
Checking the fuel pump relay
Check the voltage of the front and rear heated oxygen sensors
Checking the front and rear heated oxygen sensors
Removing the pressure in the fuel system
Fuel lines
Activation of the fuel system
Check of residual pressure in the fuel system
Check fuel lines
Checking the fuel injector
Quick connections
Fuel pump
:20. Fuel tank
Check crankcase ventilation (PCV)
Checking system EVAP
Check valve system EVAP
Check of the valve closing of the canister
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Wheels and tires
Steering
Brakes
Body
The air conditioning system
Electrical equipment
 


Hit Counter by Digits


print page printable version

Checking the front and rear heated oxygen sensors



PERFORMANCE ORDER
1. Turn off the ignition.
2. Disconnect the oxygen sensor connector.
3. Connect the ohmmeter between terminals 1 and 3 and measure resistance.

Impedance: 3-7 ohms at 20 ?� C

4. Otherwise, replace the oxygen sensor.

Torque: 30-49 N ??? m

5. Connect the connector to the oxygen sensor.

Withdrawal

PERFORMANCE ORDER
1. Disconnect from the heated oxygen sensor.
2. Special wrench unscrew the sensor and remove it and washer.

Setting

PERFORMANCE ORDER
1. Replace the oxygen sensor with a washer.

Torque: 30-49 N ??? m

2. Connect the connector to the oxygen sensor.




« previos page
Check the voltage of the front and rear heated oxygen sensors		 next page »
Removing the pressure in the fuel system

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.