REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Rio
		Instructions
		Engines A3E, A5D
		Greasing system
		Cooling
		Fuel system
			Technical data
			Fuel system
			Ignition timing
			The idle speed
			Air flow meter sensor
			Knock sensor
			Throttle Position Sensor
			Check the main relay
			Checking the fuel pump relay
			Check the voltage of the front and rear heated oxygen sensors
			Checking the front and rear heated oxygen sensors
			Removing the pressure in the fuel system
			Fuel lines
			Activation of the fuel system
			Check of residual pressure in the fuel system
			Check fuel lines
			Checking the fuel injector
			Quick connections
			Fuel pump
			:20. Fuel tank
			Check crankcase ventilation (PCV)
			Checking system EVAP
			Check valve system EVAP
			Check of the valve closing of the canister
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Wheels and tires
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment

printable version

The idle speed

PERFORMANCE ORDER

1. Apply the parking brake.

2. Start the engine and warm it up to normal operating temperature.

3. Turn off all electric power consumers.

4. Connect the inductive tachometer to the high-voltage wire of the first cylinder or pin "D" diagnostic connector (DLC).

A warning

The idle speed is not adjustable. The idle speed is controlled automatically by the ECM. Change the idle speed may be caused by irregularities in the operation of the valve control system of frequency of rotation of idling (IAC) or leaks in the intake manifold.

5. When the gear lever in neutral position, measure the idle speed.

The idle speed (transmission in neutral): 750 ?� 50 ^min -1

A warning

Due to the spark plugs, "wasted" some tachometers show the speed of twice the actual.

6. Disconnect the tachometer from a high wire or contact "About" diagnostic connector (DLC).

7. Turn off the engine.

« previos page
Ignition timing

next page »
Air flow meter sensor