add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Rio
Home
 
Kia
Rio
Instructions
Engines A3E, A5D
Greasing system
Cooling
Fuel system
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Wheels and tires
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Technical data
Electrical circuits
Generator
Check generator
Alternator drive belt
Removal, repair and generator installation
Accumulator battery
Starter
Check while cranking the engine is not warmed-up engine
Check the electrical circuit of the traction relay
Check of the traction relay
Check of brushes and brush holder
Checking the stator coils
Check rotor
Removing and installing starter
Repair of starter
Multifunction switch
Sound signal
Fuse and relay, established in car salon
Check the door lock switch activator
Check of the switch of adjustment of position of the door mirror
Check activator position outside rearview mirror
Checking the engine window
Check the rear window defogger
Repair of a current-carrying strip of a heater
Windshield Wiper Motor
Washers
Adjusting headlights
Adjustment of light fog lights
Airbags (SRS)
Warning Labels
Airbag and a spiral wire
Check airbags
Checking the spiral wire (spring)
The front passenger airbag
Electrical circuits
 


Hit Counter by Digits


print page printable version

Generator



The car is equipped with an alternator with a rectifier.

Generator - a three-phase synchronous electric car with electromagnetic excitation. The voltage is regulated integrated voltage regulator.

When the generator is an electric current flowing through the field winding creates around the poles of the rotor flux. When the rotor under each stator tooth passes the south, the north pole of the rotor and the working magnetic flux passing through the stator teeth, changes in size and voltage. This creates an alternating magnetic flux in the stator winding electromotive force.

At high speed the rotor of the generator when the generator voltage becomes more than 13,6-14,6 In, the voltage regulator is locked and the current through the field winding does not pass. The voltage generator falls, the regulator opens and again passes a current through the field winding. The higher the speed of the rotor of the generator, the longer the controller locked state, therefore, the more decreases the output voltage of the generator. The process of locking and unlocking the controller comes with a high frequency, so the fluctuations in the output voltage of the generator is not visible and it can be considered almost constant, is maintained at 13,6-14,6 V.





« previos page
Electrical circuits
next page »
Check generator

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.