REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Rio
		Instructions
		Engines A3E, A5D
		Greasing system
		Cooling
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Wheels and tires
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment
			Technical data
			Electrical circuits
			Generator
			Accumulator battery
			Starter
			Check while cranking the engine is not warmed-up engine
			Check the electrical circuit of the traction relay
			Check of the traction relay
			Check of brushes and brush holder
			Checking the stator coils
			Check rotor
			Removing and installing starter
			Repair of starter
			Multifunction switch
			Sound signal
			Fuse and relay, established in car salon
			Check the door lock switch activator
			Check of the switch of adjustment of position of the door mirror
			Check activator position outside rearview mirror
			Checking the engine window
			Check the rear window defogger
			Repair of a current-carrying strip of a heater
			Windshield Wiper Motor
			Washers
			Adjusting headlights
			Adjustment of light fog lights
			Airbags (SRS)
			Warning Labels
			Airbag and a spiral wire
			Check airbags
			Checking the spiral wire (spring)
			The front passenger airbag
			Electrical circuits

Removing and installing starter

Withdrawal

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.
2. Remove the top two screws on the intake manifold support bracket.
3. Disconnect S.
4. Remove the nut and disconnect the wire from the terminal B.
	5. Remove the screws and remove the starter.

Setting

PERFORMANCE ORDER

1. Set the starter to the engine.

2. Replace the starter mounting bolts.

3. Connect the wire into the terminal in the traction relay and secure it with a nut.

4. Connect the S.

5. Connect the cable to the negative terminal of the battery.

« previos page
Check rotor