 printable version
Removal, installation and adjustment of components of the cleaning device and the rear window washer
Scheme of the rear window cleaning Replacement brush See. Section Outside equipment and body parts. Withdrawal Wiper arm with a brush | - Unfold the cover of the spindle carrier arm.
 | - Give a fixing nut and remove the lever to the drive shaft of the electric motor.
|
|
|
The drive motor The tank and the pump supplying washer fluid |  | - Open the tailgate, turn out fixing screws and remove the trim panel the right wall of the luggage compartment.
|
- Disconnect the electrical wiring of the pump and hose washer fluid.
- Remove the retaining bolt and remove the tank assembly mounted with a pump.
|
|
The nozzle feeding washer fluid |  | - With a thin flat-blade screwdriver press and release the locking tab of the nozzle body panels.
|
|
|
Setting |  | - Installation is in the reverse order - track correctness of placing the brush on stekle.Ves fixture tighten with demanded effort.
|
|
|
Adjusting washer fluid nozzles feed |  | - Adjustment is made by turning the jet nozzle introduced his work bore needle - jet should fall into the right place on the glass.
|
 | To avoid breaking of a needle in a jet should first "release" in the heat of the flame lighters. |
|
|
|
