add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (from 1993 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mercedes-Benz C-class
Home
 
Mercedes-Benz
C-class
Introduction
Maintenance
Engines
Lubrication system
Cooling
Heating and ventilation
Ignition system
Fuel system
Fuel System Description
PETROL INJECTION
The injection system of diesel engines and power
EXHAUST
Transmission
Check the thickness of the clutch disc in the assembled state
Check clutch
Bearing Clutch Clutch
Bleeding the clutch control system
Probuksovochka
Troubleshooting clutch system
Manual and automatic gearbox
Chassis
Steering
Brakes
Body
Electrical
 


Hit Counter by Digits


print page printable version

Probuksovochka



What can be caused by slipping the clutch or incomplete off when pressing the pedal?

Slipping the clutch is shown that under quite serviceable engine the car badly overcomes liftings, slowly dispersed. This may be caused by lubricating with disks, their strong deterioration, decrease in elasticity of springs, the lack of free running clutch pedal.

Incomplete clutch causes difficulty and noise during gear changes and can lead to premature failure of synchronizers and to the accelerated wear of tooth gear box. This failure is most often caused by pollution, a warp or deformation of disks, wrong adjustment of position of the arms off, as well as at too big free during the clutch pedal.

It should be borne in mind that the noise in the gearbox - it is not always a consequence of incomplete clutch. This noise may occur when wear or incorrect adjustment of bearings, as well as deterioration or wrong gearing of bevel gears. Strong knock in these locations indicates the presence of a serious problem that requires an immediate stop of the car and repair the unit.

The difficulty may be caused by shift or shuts down unexpectedly?

The crux of the shift or spontaneous off - the result of deterioration of locks and latches or drive shift mechanism. There without serious repair is necessary.

To prevent such failure in the following ways: periodically carefully to check reliability of fastening of all units and power transmission parts, as well as to monitor the level of oil in the gearbox and in time to change it.





« previos page
Bleeding the clutch control system
next page »
Troubleshooting clutch system

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.